Almost 1.25 million people die in road crashes annually. In most cases, road traffic deaths are a result of drunk driving, speeding, and damaged wheels or tires.
Damaged wheels can also lead to tires popping, which eventually result in blowouts. Common signs that indicate the need for heavy duty truck alignment equipment include occasional shakiness or vibration, deflating tires, uneven steering or rotation, and visible wheel damages.
Improper wheel alignment is caused by uneven pressure on the tires, springs, suspensions, and shocks. Jolting impacts can also result in misalignment, especially if you hit a pothole or curb.
Heavy duty truck alignment equipment can examine and adjust the angles of the wheels to be relative to each other and the car frame of the body. Individual sensors are also installed in each wheel to calibrate the tire pressure and ensure excellent performance.
Proper wheel alignment also ensures that the tires will not wear unevenly and prematurely. Here are the benefits of getting a piece of equipment from a reputed company like Rav America for wheel alignment purposes.
Automotive studies indicate that misalignment can reduce gas mileage by up to 10%. This is because misaligned tires tend to drag instead of rolling freely.
An automobile is misaligned when the steering and suspension systems are not set at their appropriate angles. With a wheel alignment equipment, drivers can ensure better gas mileage as the tool can deliver adequate pressure to the suspension and steering systems.
A vehicle owner who drives a median of 15,000 miles annually usually receives averages 25 miles per gallon at $3.50. According to the U.S. Environmental Protection Agency (EPA), proper wheel alignment brings in $150 in annual fuel cost savings.
Image Source: pakwheels.com
On average, a truck owner spends roughly $100 to $600 every 5000 to 7000 miles for repair and maintenance. This number could increase, especially when damaging the suspension or steering systems.
With a wheel alignment equipment, truck owners can prevent damaging essential vehicle components and shelling out big bucks for significant repairs. Damages in vehicle parts usually begin from uneven or premature tire problems like camber wear, feathering, and heal or toe wear.
Proper wheel alignment is needed for a truck to perform well when driving. Regular wheel alignment inspections can enhance truck safety and prolong its lifespan.
Misaligned wheels cause the truck to become off-center, which makes it even more challenging to steer. Using a wheel alignment tool eases the process of steering vehicles and relieves undue stress on the suspension, therefore, ensuring safety.
While there are no specific requirements, it’s best to perform wheel alignment every two to three years. Wheel alignment is advisable for newly-installed truck tires to ensure that the rims are firmly attached to the vehicle.
Performing wheel alignment is also necessary when the truck pulls to one side when driving. Uneven and screeching tires also signal an improper wheel alignment.
A regular wheel alignment usually takes about an hour. However, it could take longer when there are damages to the steering bushing, ball joint, suspension, or track rod.
Image Source: www.mynrma.com.au